INCH-POUND
*
MIL-DTL-6070C
24 February 1997
SUPERSEDING
MIL-P-6070B
24 FEB. 1986
DETAIL SPECIFICATION
PLYWOOD AND VENEER, AIRCRAFT FLAT PANEL
*
Inactive for new design after 24 February 1997
For new design use Commercial Item Description A-A-55057, Type C,
Panels, Wood/Wood Based; Construction and Decorative or HPVA HP-1
Voluntary Standard for Hardwood and Decorative Plywood
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers aircraft flat panel plywood and veneer.
1.2 Classification. Aircraft plywood will be furnished in one grade only in the species and of the panel
construction as selected from Tables I, II or III.
2. APPLICABLE DOCUMENTS
2.1 Government Documents.
*
2.1.1 Specifications, standards, and handbooks . The following specification, standards and handbooks
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those listed in the issue of the Department of Defense Index of Specification and Standards
(DODISS) and supplement thereto, cited in the solicitation (see 6.2)
SPECIFICATIONS
FEDERAL
MMM-A-181 - Adhesive, Room Temperature and Intermediate-Temperature Setting Resin (Phenol,
Resorcinol, and Melamine Base)
A-A-55057
- Panels, Wood/Wood Based; Construction and Decorative
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use
in improving this document should be addressed to: Defense Industrial Supply Center, ATTN; DISC-ECA
700 Robbins Ave., Philadelphia, PA 19111-5096, by letter or the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document.
AMSC N/A
FSC 5530
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business